Regn Electric (Electric use only 120 Degrees setting)Regn Diesel (95 Degrees setting)Road Diesel (75 Degrees setting)
Turn on the oven prior to loading on all operations.
Oven on Diesel to be turned on to the Regenerating position (Regen Diesel).
Put food into the oven when satisfied with the pre-heated temperature.
Load the food into the oven to regenerate to your preferred core temperature.
When the core temperature has been achieved, switch the oven to its holding temperature position (Road diesel).
Switching operation from Diesel Regen to Road Diesel
Important: Switching the oven from regeneration to holding, you must have both switches (Regen Diesel and Road Diesel) in the "on" position.
When both switches are in the "on" position, the displays on both controls will read unusual figures. When the figures have settled, turn off the Regenerating switch and leave the Road Diesel on. The controller on the Road Diesel will change back to the oven temperature.
Switching to Road Diesel will allow the oven to cycle at 75 degrees centigrade +/-2 degrees.
If at any time you wish to return the oven to Regenerating temperatures (increase food temperature), repeat the above procedure and turn off the Road Diesel holding temperature switch.
If the above procedures are not followed, the oven will automatically go into a safety mode and will not heat for approximately 15-20 minutes.
When you have finished with your last delivery, turn off whichever switch you have on.
Electric operation
Plug the power lead into the side of the vehicle, lifting up the white flap.
Switch on Regen Electric. You will see at this stage two controllers will display the oven temperature.
The oven temperatures are preset to 120 degrees centigrade, and when the air temperature has been achieved, the ovens will cycle on a 2-degree differential.
When changing over from electric to diesel, you must pull out the standby lead and turn off the electric switch before turning on any of the diesel switches.
Before driving away, please ensure you have disconnected the 240-volt lead from the vehicle.
Important: Monitor the temperatures on electric so you do not overheat the food.
On all operations, when finished, turn off all switches.
Optional Extras
Paint
White
Upholstery
Cloth - Tanega
Standard Features
Audio and Communications
12V Socket - Front
2 DIN Radio
AUX Port
Bluetooth
DAB Digital Radio
Radio - CD Player
USB Socket
15in Steel Wheels - Nissan Design
Dark Grey Side Protection Mouldings
Electric Folding and Heated Door Mirrors
French Doors
Front Electric Windows
Grained Mirror and Bumpers
One Touch Front Electric Windows
Roof Bar Fixings
Side Sheet Metal Panels
Spare Wheel
Illumination
Front Fog Lights
LED Daytime Running Lights
Interior
Audio Switch on Steering Wheel
Central Storage Tray Between Front Seats
Central Storage and Armrest
Centre Console with Bottle Holder and Plastic Armrest
Closed Glovebox
Driver Seat Slide - Reclining and Height Adjustment
Driver and Passenger Compartment Door Bins
Driver and Passenger Sun Visor with Pocket
Front Headrests
Front Manual A-C
Full Steel Bulkhead
Left Side Sliding Door
Load Area Lighting
Overhead Parcel Shelf
Right Side Sliding Door
Steering Wheel Audio and Hands Free Controls
Tie-Down Rings in Load Compartment
Unglazed Rear Doors - 180 Degree Asymmetric
Performance
Power Assisted Steering
Safety and Security
ABS with EBD
Airbag - Driver
Driver Belt Warning and Buzzer
Height Adjustable Front Seatbelts
Hill Start Assist
Immobiliser
Remote Central Locking with 2 Button Key
Superlocking
Thatcham Category 1 Alarm
VDC - Vehicle Dynamic Control
